|2022-07-07||FULL - morning session||Register|
|2022-07-07||FULL - afternoon session||Register|
|2022-07-12||AM FULL -FRENCH||Register|
|2022-07-13||7:15 to 11:15||Register|
|2022-07-13||12:00 to 16:00||Register|
|2022-07-21||7:15 to 11:15||Register|
|2022-07-21||12:00 to 16:00||Register|
|2022-07-28||7:15 to 11:15||Register|
|2022-08-03||12:00 to 16:00||Register|
|2022-08-03||7:15 to 11:15||Register|
|2022-08-11||7:15 to 11:15||Register|
|2022-08-11||12:00 to 16:00||Register|
|2022-08-16||7:15 to 11:15||Register|
|2022-08-16||12:00 to 16:00||Register|
|2022-08-22||7:15 to 11:15 (FRENCH)||Register|
Working at Heights Refresher has been designed to reinforce key learning outcomes of the participants’ original Working at Heights training and ensure that participants are able to demonstrate their continued knowledge of the correct use of fall protection equipment.
The Ontario Ministry of Labour (MOL) requires workers to complete an approved half-day Working at Heights refresher training course after three years under the O. Reg. 297/13: Occupational Health and Safety Awareness and Training. https://www.ontario.ca/laws/regulation/130297
Who needs this training?
Any worker who had previously successfully completed an approved Working at Heights training program
Students must present their Learners ID# on their Ministry of Labour issued Working at Heights card at the time of the training.
If you have lost your Ministry of Labour Working at Heights card please contact 1-877-202-0008
If you haven’t completed the Working at Heights training through an approved training provider, then the Working at Heights Refresher course is not the correct course for you. Please see the Working at Heights Fundamentals of Fall Prevention schedule.
1. A copy of the Ministry of Labour certificate or an approved training provider Working at Heights certificate must be provided with registration.
2. Legal Photo ID must be provided upon arrival (Driver’s license, Health card, Passport, Student card etc.)
Working at heights refresher training is the practical module of the Working at Heights training program (section 9.2 of the Working at Heights Training Program Standard). The minimum duration of the refresher training is (3.5) hours of training delivery
The Practical module covers the following topics;
1. Barriers and safety nets;
2. Personal fall protection equipment;
3. Anchor points;
4. Work positioning systems, work access and platforms; and
5. Rescue planning.
In addition, it includes a hands-on demonstration of equipment and procedures, and a written test.
Duration: 3 1/2 hours
Language options: English and French